CD74HCT74M

CD74HCT74M Overview

It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. In the configuration, Differentialis used as the output. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -55°C~125°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74HCT series. There should be no greater frequency than 50MHzon its output. It consumes 4μA of quiescent 14terminations have occurred. Members of the 74HCT74family make up this object. A voltage of 5V is used to power it. A JK flip flop with a 10pFfarad input capacitance is used here. Electronic devices of this type belong to the HCTfamily. There is an electronic component mounted in the way of Surface Mount. There are 14pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part you are looking for is included in FF/Latches. An electrical current of 5V volts is applied to it. Optimal efficiency requires a supply voltage of 5V. With an output current of 4mA, this device offers maximum design flexibility. There are 1 output lines in this JK flip flop. 2is the number of channels.

CD74HCT74M Features

Tube package
74HCT series
14 pins
5V power supplies

CD74HCT74M Applications

There are a lot of Texas Instruments CD74HCT74M Flip Flops applications.

• Individual Asynchronous Resets
• Load Control
• Common Clocks
• Supports Live Insertion
• Frequency Divider circuits
• EMI reduction circuitry
• 2 – Bit synchronous counter
• Cold spare funcion
• Automotive
• Circuit Design