CDCV304PW

CDCV304PW Overview

It's a electronic part of the 8-TSSOP (0.173, 4.40mm Width) package. There is a case available for the circuit clock in Tube. A total of 8 terminations are present. High efficiency is feasible with a supply voltage of 2.5V. In this case, it is set up as Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). Setting the temperature to -40°C~85°C will ensure reliable performance. The clock switch should operate with a voltage of 2.3V~3.6VV. In this case, it is placed in the way of Surface Mount. There is a pin count of 8 on timeing clock. During operation, 8 pins are used. This object belongs to the CDCV304 family. It is contained in Clock Drivers. The buffer IC belongs to the 304 family. There is a 3.6V maximum supply voltage set (Vsup). As a general rule, the supply voltage (Vsup) should be maintained above 2.3V. As a default, it outputs 4. A 3.3V volt supply powers it. It is capable of maintaining excellent accuracy with a frequency of 200MHz. It is configured when there is a 1 input.

CDCV304PW Features

8 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 200MHz frequency

CDCV304PW Applications

There are a lot of Texas Instruments CDCV304PW Clock Buffers & Drivers applications.

• Clock signal format conversion
• Handheld test instruments
• DDR4 JEDEC standard RDIMM design
• Data transmission
• DDR4 JEDEC standard LRDIMM design
• Big data
• Tlecom applications
• Aviation
• Clock signal duplication
• Cell Phone (UMTS/WCDMA/GSM)