CDCVF2510PW

CDCVF2510PW Overview

As a clock IC, PLLs is packaged using the Tube method. There is a clock generator embedded in the 24-TSSOP (0.173, 4.40mm Width) package. This clock generator will sustain a maximum temperature of 260 when reflown. In it, there are 24 terminations to be found. This electronic frequency generator requires a voltage of 3.3V. As the Clock PLL's input, LVTTL is designed to be used in order to generate the clock signal. It is possible to access the full performance of the electrical part by implementing 1 circuits. With the Surface Mount, it is easy to install this electric component on the panel. The maximum voltage this clock PLL can handle is 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. By calculating the test statistics, 0°C~85°C is the appropriate ambient temperature. A PLL Clock Driver is a classification for the electronic part in question. Microprocessors are specifically designed to use this clock-generating IC, which has a 24-bit output. The related electrical components for the base part number CDCVF2510 can be found below. PLL is designed with 24 pins. Time clock generator can handle a voltage of 3.3V as the supply voltage. This clock generator can be classified as a kind of Clock Drivers in general. The output frequency can be magnified as high as possible with the assistance of 10 signal outputs. By operating at a frequency of 175MHz, frequency generator is able to achieve high efficiency. This PLL can be fitted with a load capacitance of 25pF, which makes it suitable for electric motors.

CDCVF2510PW Features

Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF

CDCVF2510PW Applications

There are a lot of Texas Instruments CDCVF2510PW Clock Generators applications.

• Computers to manage memory cards
• Coherent detection of the signal
• Aerospace and defense
• Clock recovery
• Test equipment
• MRI
• Automatic control
• Small signal recovery
• Camera systems
• Jitter reduction