CLVC1G374QDBVRQ1

CLVC1G374QDBVRQ1 Overview

SOT-23-6is the packaging method. There is an embedded version in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 1.65V~5.5V. The operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. FPGAs belonging to the Automotive, AEC-Q100, 74LVCseries contain this type of chip. There should be no greater frequency than 175MHzon its output. A total of 6 terminations have been made. Members of the 74LVC1G374family make up this object. It is powered by a voltage of 1.8V . Its input capacitance is 3pFfarads. Electronic devices of this type belong to the LVC/LCX/Zfamily. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 6. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 1bits in its design. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. 1 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TR based on its reliable performance. This flip flop has a total of 2ports. The output current of 24mA makes it feature maximum design flexibility. The JK flip flop is with 3 output lines to operate. It consumes a total of 10μA quiescent current at any given time.

CLVC1G374QDBVRQ1 Features

Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
6 pins
1 Bits

CLVC1G374QDBVRQ1 Applications

There are a lot of Texas Instruments CLVC1G374QDBVRQ1 Flip Flops applications.

• Frequency division
• Memory
• Computers
• Shift Registers
• Single Up Count-Control Line
• 2 – Bit synchronous counter
• Buffered Clock
• Bounce elimination switch
• Frequency Dividers
• Power down protection