CY2292FXIT

CY2292FXIT Overview

This clock IC is packaged using the Tape & Reel (TR) method. Embedded in the 16-SOIC (0.154, 3.90mm Width) package is this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 16 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 5V. A clock generator's input is called Clock, Crystal and it is designed as the input for this clock generator. To access the electronic component's full performance, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 60MHz 80MHz maximum. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock PLL works with 3.3V 5V supply voltage provided. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. CMOS is designed for clock generator's output. This electronic component can be classified as a Clock Generator, Fanout Distribution. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. According to the base part number CY2292, its related parts can be found. There are 16 pins that are available on the frequency generator. There is a maximum supply voltage of 5V that frequency generators can handle. As such, it is often referred to as a kind of Clock Generators clock PLL. 6 signal outputs enable clock PLL to magnify output frequency as high as possible. An 8-element clock PLL with a low jitter performance is available on this page.

CY2292FXIT Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V
Operating supply voltage of 5V

CY2292FXIT Applications

There are a lot of Cypress Semiconductor Corp CY2292FXIT Clock Generators applications.

• Signal frequency synthesis circuits
• Fiber Channel
• Tracking filters
• Walkie-talkies
• PCI express cards
• Sampling clocks for ADC and DAC
• Signal demodulation
• Cable television converter boxes
• Jitter reduction
• HDD recorders