CY23FP12OXI

CY23FP12OXI Overview

Clock ICs are packaged using the Tube method. This clock generator is embedded in the 28-SSOP (0.209, 5.30mm Width) package. When reflowed, this frequency generator can withstand a maximum temperature of 260. 28 terminations can be found in frequency generators. This time clock generator should be voltaged at 3.3V. This Clock PLL will be fed by LVCMOS, LVTTL as its input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An up to 166.7MHz frequency is provided by this clock-based RF synthesizer. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL is capable of receiving a maximum of 3.465V as a supply voltage. There are 2.5V 3.3V available for use with this clock PLL. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. It's compatible with LVCMOS logic levels. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Clock PLL is equipped with 28 pin count. The related electronic parts of part number CY23FP12 are listed below. It is possible to connect to the frequency generators via 28 pins. In terms of the supply voltage, analog clock generator can handle 3.3V volts. A Clock Drivers clock generator is essentially what this device is. 12 signal outputs maximi12e the output frequency. The timing skew of this frequency synthesizer is low at 0.4 nsmax.

CY23FP12OXI Features

Available in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY23FP12OXI Applications

There are a lot of Cypress Semiconductor Corp CY23FP12OXI Clock Generators applications.

• Automatic control system test
• Aerospace and defense
• Smartphones
• Digital circuits
• Tracking filters
• Bluetooth receivers
• Precision auxiliary angle deflection measurement
• Digital HDTV systems
• Wireless handsets
• Antenna automatic tracking