CY2XP22ZXIT

CY2XP22ZXIT Overview

The Tape & Reel (TR) method is used for packaging clock ICs. Clock PLL is embedded in the 8-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. As you can see, it consists of 8 terminations. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. This clock generator receives its inputs from Crystal, which is designed to be the clock source. 1 circuits are implemented to access the electronic component's full performance. RF synthesizers based on this clock provide frequencies up to 125MHz maximum. With the Surface Mount, it is easy to install this electric component on the panel. As long as there are 2.375V~3.465V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. The RF synthesizer is compatible with LVPECL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator component. In particular, this clock PLL is designed to be used with microprocessors. This part number is related to its related electronic parts. There are 8 pins on the frequency generators that are available for use. This clock PLL features CAN ALSO OPERATES AT 3.3V SUPPLY for better clock signal output. When operated at 25MHz, frequency synthesizer achieves high efficiency.

CY2XP22ZXIT Features

Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V

CY2XP22ZXIT Applications

There are a lot of Cypress Semiconductor Corp CY2XP22ZXIT Clock Generators applications.

• Main oscillator in receiver
• Automatic test equipment
• Radiotelephones
• Radio receivers
• Satellite receivers
• Line cards used in telephone exchange
• Peripheral devices
• Communication infrastructure
• Instrument
• Frequency Modulation (FM) stereo decoders