CY74FCT162374CTPVC

CY74FCT162374CTPVC Overview

The flip flop is packaged in 48-BSSOP (0.295, 7.50mm Width). You can find it in the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. JK flip flop belongs to the 74FCTseries of FPGAs. In total, it contains 2 elements. As a result, it consumes 500μA quiescent current and is not affected by external forces. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74FCT162374 family contains this object. It is powered from a supply voltage of 5V. A JK flip flop with a 4.5pFfarad input capacitance is used here. Electronic devices of this type belong to the FCTfamily. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 48 pins. This device's clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 16bits in its design. There are 5V power supplies attached to it. The D flip flop is embedded with 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With a current output of 24mA , it offers maximum design flexibility. It has 3 output lines to operate. It consumes a total of 5μA quiescent current at any given time.

CY74FCT162374CTPVC Features

Tube package
74FCT series
48 pins
16 Bits
5V power supplies

CY74FCT162374CTPVC Applications

There are a lot of Texas Instruments CY74FCT162374CTPVC Flip Flops applications.

• Bus hold
• Memory
• Bounce elimination switch
• Safety Clamp
• Load Control
• Data Synchronizers
• Functionally equivalent to the MC10/100EL29
• Latch-up performance
• Power down protection
• Shift registers