CY74FCT162823CTPVC

CY74FCT162823CTPVC Overview

The flip flop is packaged in 56-BSSOP (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74FCTseries of FPGAs. The element count is 2 . As a result, it consumes 500μA quiescent current and is not affected by external forces. A total of 56 terminations have been made. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 4.5pF farads. An electronic device belonging to the family FCTcan be found here. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In addition, WITH CLEAR AND CLOCK ENABLEis a characteristic of it.

CY74FCT162823CTPVC Features

Tube package
74FCT series

CY74FCT162823CTPVC Applications

There are a lot of Rochester Electronics, LLC CY74FCT162823CTPVC Flip Flops applications.

• Circuit Design
• ATE
• Load Control
• Event Detectors
• High Performance Logic for test systems
• Asynchronous counter
• Registers
• Divide a clock signal by 2 or 4
• Cold spare funcion
• Reduced system switching noise