CY74FCT16374CTPVC

CY74FCT16374CTPVC Overview

It is packaged in the way of 48-BSSOP (0.295, 7.50mm Width). It is included in the package Tube. The output it is configured with uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74FCT series. The element count is 2 . This process consumes 500μA quiescents. Currently, there are 48 terminations. The 74FCT16374 family contains this object. A voltage of 5V is used to power it. The input capacitance of this JK flip flopis 4.5pF farads. Devices in the FCTfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 48. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. The flip flop is designed with 16bits. To achieve this superior flexibility, 1 circuits are used. It runs on 5Vvolts of power. A total of 2ports are embedded in the D flip flop. High efficiency requires the supply voltage to be maintained at 5V. As a result of its output current of 64mA, it is very flexible in terms of design. There are 3 output lines on it. This D latch consumes 5μA quiescent current at all.

CY74FCT16374CTPVC Features

Tube package
74FCT series
48 pins
16 Bits
5V power supplies

CY74FCT16374CTPVC Applications

There are a lot of Texas Instruments CY74FCT16374CTPVC Flip Flops applications.

• Frequency division
• Automotive
• Memory
• Divide a clock signal by 2 or 4
• Data transfer
• Common Clocks
• Shift Registers
• Buffer registers
• Buffered Clock
• Individual Asynchronous Resets