CY74FCT377ATSOCT

CY74FCT377ATSOCT Overview

The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. As configured, the output uses Non-Inverted. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 4.75V~5.25V. Currently, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74FCTseries contain this type of chip. In total, it contains 1 elements. This process consumes 200μA quiescents. A total of 20terminations have been recorded. This D latch belongs to the family of 74FCT377. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 5pF farads. Devices in the FCTfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. The flip flop is designed with 8bits. It reaches 5.25Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 4.75V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. It offers maximum design flexibility with its output current of 64mA. A total of 8input lines have been provided.

CY74FCT377ATSOCT Features

Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies

CY74FCT377ATSOCT Applications

There are a lot of Texas Instruments CY74FCT377ATSOCT Flip Flops applications.

• Storage Registers
• Matched Rise and Fall
• Differential Individual
• Reduced system switching noise
• Data transfer
• EMI reduction circuitry
• Frequency Divider circuits
• Single Down Count-Control Line
• Consumer
• Pattern generators