CY74FCT823ATPC

CY74FCT823ATPC Overview

The package is in the form of 24-DIP (0.300, 7.62mm). It is contained within the Tubepackage. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. It is mounted in the way of Through Hole. The supply voltage is set to 4.75V~5.25V. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74FCTseries of FPGAs. There are 1 elements in it. It consumes 200μA of quiescent current without being affected by external factors. The number of terminations is 24. D latch belongs to the 74FCT823 family. Power is supplied from a voltage of 5V volts. Its input capacitance is 5pF farads. Devices in the FCTfamily are electronic devices. A part of the electronic system is mounted in the way of Through Hole. A total of 24pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchesbase part number family. Flip flops designed with 9bits are used in this part. In order for the device to operate, it requires 5V power supplies. The D flip flop has no ports embedded. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. The 64mA output current allows it to be designed with the greatest amount of flexibility. This input has 9lines in it.

CY74FCT823ATPC Features

Tube package
74FCT series
24 pins
9 Bits
5V power supplies

CY74FCT823ATPC Applications

There are a lot of Texas Instruments CY74FCT823ATPC Flip Flops applications.

• Storage registers
• Matched Rise and Fall
• Convert a momentary switch to a toggle switch
• EMI reduction circuitry
• Storage Registers
• Registers
• Frequency Divider circuits
• Automotive
• Computers
• Patented noise