CY74FCT823CTQCT

CY74FCT823CTQCT Overview

24-SSOP (0.154, 3.90mm Width)is the packaging method. You can find it in the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74FCTseries of FPGAs. D latch consists of 1 elements. During its operation, it consumes 200μA quiescent energy. 24terminations have occurred. Members of the 74FCT823family make up this object. An input voltage of 5Vpowers the D latch. JK flip flop input capacitance is 5pF farads. It belongs to the family of electronic devices known as FCT. Surface Mount mounts this electronic component. 24pins are included in its design. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. The design is based on 9bits. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. A total of 2ports are embedded in the D flip flop. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With a current output of 64mA , it offers maximum design flexibility. As of now, there are 9input lines.

CY74FCT823CTQCT Features

Tape & Reel (TR) package
74FCT series
24 pins
9 Bits
5V power supplies

CY74FCT823CTQCT Applications

There are a lot of Texas Instruments CY74FCT823CTQCT Flip Flops applications.

• Count Modes
• Consumer
• CMOS Process
• Data Synchronizers
• Modulo – n – counter
• Instrumentation
• ESCC
• Memory
• Buffer registers
• Divide a clock signal by 2 or 4