CY7C372I-100JC

CY7C372I-100JC Overview

This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with LQFP.The device is programmed with 37 I/Os.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 5V voltage supply for this device.It belongs to the family [0].The chip should be packaged by Bulk.It is programmed with 44 pins.In order to maintain high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].In this case, Surface Mountis used to mount the electronic component.The pins are [0].A maximum voltage of 5.25Vis required for operation.In order for it to operate, a supply voltage of 4.75Vis required.It is recommended that the operating temperature be greater than 0°C.It is recommended that the operating temperature be below 70°C.The logic block consists of 4 l logic blocks (LABs).There are 3 dedicated inputs used to detect the status of input signals.clock frequency should not exceed [0].

CY7C372I-100JC Features

LQFP package
37 I/Os
44 pin count
44 pins
4 logic blocks (LABs)

CY7C372I-100JC Applications

There are a lot of Cypress Semiconductor CY7C372I-100JC CPLDs applications.

• Storage Cards and Storage Racks
• State machine control
• Complex programmable logic devices
• Power up sequencing
• LED Lighting systems
• Multiple Clock Source Selection
• White goods (Washing, Cold, Aircon ,...)
• DDC INTERFACE
• Pattern recognition
• Synchronous or asynchronous mode