CY7C375I-66AC

CY7C375I-66AC Overview

There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the TQFP package.As a result, it has 37 I/O ports programmed.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 5V.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Bulk.There are 160 pins on the chip.High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].In this case, Surface Mountis used to mount the electronic component.160pins are included in its design.There is a maximum supply voltage of 5.25Vwhen the device is operating.Despite its minimal supply voltage of [0], it is capable of operating.It is possible to achieve a frequency of 100MHz.Ideally, the operating temperature should be greater than 0°C.It is recommended that the operating temperature be lower than 70°C.The program consists of 8 logic blocks (LABs).The status of input signals is determined by 1dedicated inputs.

CY7C375I-66AC Features

TQFP package
37 I/Os
160 pin count
160 pins
8 logic blocks (LABs)

CY7C375I-66AC Applications

There are a lot of Cypress Semiconductor CY7C375I-66AC CPLDs applications.

• Bootloaders for FPGAs
• Protection relays
• Software Configuration of Add-In Boards
• Code converters
• Interface bridging
• ON-CHIP OSCILLATOR CIRCUIT
• USB Bus
• DDC INTERFACE
• State machine design
• Pattern recognition