All Products

DG2735ADN-T1-GE4

78ns, 58ns SPDT 500mOhm QUAD Analog Switches DG2735 10 Pins 2nA 3V 10-UFQFN

Manufacturer: Vishay Siliconix
Origchip NO: 880-DG2735ADN-T1-GE4
Package: 10-UFQFN
Datasheet: PDF
Stock: 478
Description: 78ns, 58ns SPDT 500mOhm QUAD Analog Switches DG2735 10 Pins 2nA 3V 10-UFQFN(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Resistance	500mOhm
Terminal Finish	NICKEL PALLADIUM GOLD
Max Power Dissipation	208mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Number of Functions	2
Supply Voltage	3V
Reach Compliance Code	unknown
Base Part Number	DG2735
Pin Count	10
Number of Outputs	4
Number of Channels	1
Max Supply Voltage	4.3V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Power Dissipation	208mW
Max Supply Current	1μA
Turn On Delay Time	78 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	58 ns
-3db Bandwidth	50MHz
On-State Resistance (Max)	500mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	55pF
On-state Resistance Match-Nom	0.06Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	78ns, 58ns
Channel-to-Channel Matching (ΔRon)	60m Ω
Crosstalk	-70dB @ 100kHz
Switch-on Time-Max	80ns
Switch-off Time-Max	60ns
Voltage - Supply, Single (V+)	1.65V~4.3V
Height Seated (Max)	0.6mm
Length	1.8mm
RoHS Status	ROHS3 Compliant
Factory Lead Time	19 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-UFQFN
Number of Pins	10
Weight	7.002332mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2016

DG2735ADN-T1-GE4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 10-UFQFN. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 10. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. An electrical component of this type can be found in the 10 series. SPDT switching circuits are used in these analog switch ics. Using the DG2735 search parameter, you can discover variants of the switch. An switch multiplexer with 500mOhm internal resistance has a value of 500mOhm. For functions related to 10 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 4.3V. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 1.65V. This digital switch can be operated with a current of 1μA. A voltage of 1.65V~4.3V is required to drain this analog switch from a single voltage supply. Putting voltage greater than 1μA on the multiplexer may cause damage. The 2 inputs need to be operated in order to work. 4 outputs are included in the analogue multiplexer.

DG2735ADN-T1-GE4 Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 50MHz

DG2735ADN-T1-GE4 Applications

There are a lot of Vishay Siliconix DG2735ADN-T1-GE4 Analog Switches & Multiplexers ICs applications.

Battery Powered Systems
Residential Gateways, Home Gateway/Router
Microprocessor controlled systems
Multi-Line E1 Interface Cards
Audio and video signal routing
Communication systems
Digital cross connects (DSX-1)
Relay Replacement
DSUs
Low-Voltage