All Products

DG418CY

175ns, 145ns SPST - NO 35Ohm Analog Switches DG418 8 Pins 250pA 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Maxim Integrated
  • Origchip NO: 503-DG418CY
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 264
  • Description: 175ns, 145ns SPST - NO 35Ohm Analog Switches DG418 8 Pins 250pA 8-SOIC (0.154, 3.90mm Width)(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1997
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
ECCN Code EAR99
Resistance 100Ohm
Max Power Dissipation 471mW
Base Part Number DG418
Pin Count 8
Number of Circuits 1
Max Supply Voltage 20V
Min Supply Voltage 4.5V
Operating Supply Current 100pA
Nominal Supply Current 100pA
Max Supply Current 1μA
Number of Bits 2
Throw Configuration SPST
Turn On Delay Time 175 ns
Voltage - Supply, Single/Dual (±) 10V~30V ±4.5V~20V
Supply Type Dual, Single
Turn-Off Delay Time 145 ns
Max Dual Supply Voltage 20V
On-State Resistance (Max) 35Ohm
Min Dual Supply Voltage 4.5V
Multiplexer/Demultiplexer Circuit 1:1
Current - Leakage (IS(off)) (Max) 250pA
Channel Capacitance (CS(off), CD(off)) 8pF 8pF
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 175ns, 145ns
Charge Injection 3pC
Channel-to-Channel Matching (ΔRon) 3 Ω (Max)
Crosstalk -85dB @ 1MHz
Height 1.5mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

DG418CY Overview


This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. An electrical component of this type can be found in the 8 series. Unlike digital switches, these are based on SPST - NO switching circuits. A total of 1 circuits make up this switch device. DG418 can be used to search for analog multiplexer variants. It has an internal resistance of 100Ohm. For details about the functions of 8 pins, please refer to the datasheets. Users should never supply a voltage higher than 20V to a switch device. Dual, Single supply type digital switch with a low cost. 4.5V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 100pA current. When the digital multiplexer is charged above 1μA, damage can occur. There is no problem with using dual supply voltage, but it should not exceed 20V. A dual power supply should have at least 4.5V voltage attached. It can conduct 2-bit signals.

DG418CY Features


Switch Circuit: SPST - NO
100pA Supply Current
2-Bit

DG418CY Applications


There are a lot of Maxim Integrated DG418CY Analog Switches & Multiplexers ICs applications.

  • Multiplexers
  • Ultrasound
  • High speed data transmission line cards
  • Remote Powered Equipment
  • Cable PC
  • FTTH
  • Automotive applications
  • DVD-R
  • Low-Voltage
  • SONET