DM74ALS245AWM

DM74ALS245AWM Overview

Logical driver uses a neat 20-SOIC (0.295, 7.50mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 15mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74ALS series devices. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. The bus transceiver employs 8 bits for each element. You can search "74ALS245" for other related electrical components. In quiescent state, the electronic part uses 36mA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. 8 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as 0°C. Digital buffer should operate with ambient temperature no higher than 70°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct 24mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. Supplier device package of this electronic part would be 20-SOIC. The fundamental operation of logical driver is based on 8 circuits. The typical output current of the logical driver is measured 24mA.

DM74ALS245AWM Features

High Level Output: 24mA
Low Level Output: 24mA

DM74ALS245AWM Applications

There are a lot of ON Semiconductor DM74ALS245AWM Buffers & Transceivers applications.

• Bar, KTV wireless entertainment
• Sensor reporting
• Desktop radio
• Long-distance fiber optic network applications
• Car alarm systems
• Notebook
• interconnection between switches
• IPTV front end
• TV signal transmission
• Broadcast application