DM74ALS564AWM

DM74ALS564AWM Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. You can find it in the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74ALS series. In order for it to function properly, its output frequency should not exceed 30MHz. A total of 1 elements are present. It consumes 18mA of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power source is powered by 5V. It is a member of the ALSfamily of D flip flop. There is a 5.5Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 4.5V. This flip flop has a total of 2ports.

DM74ALS564AWM Features

Tube package
74ALS series

DM74ALS564AWM Applications

There are a lot of Rochester Electronics, LLC DM74ALS564AWM Flip Flops applications.

• Divide a clock signal by 2 or 4
• Memory
• EMI reduction circuitry
• Shift Registers
• Storage Registers
• Differential Individual
• Set-reset capability
• Safety Clamp
• ESD performance
• Clock pulse