DM74ALS74AMX

DM74ALS74AMX Overview

In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. There is a Differentialoutput configured with it. In the configuration of the trigger, Positive Edgeis used. Surface Mountis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. 0°C~70°C TAis the operating temperature. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74ALS series. You should not exceed 34MHzin the output frequency of the device. A total of 2elements are contained within it. As a result, it consumes 4mA quiescent current. You can search similar parts based on 74ALS74. There is an electronic component mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This flip flop is designed with 2 Bits. The superior flexibility is achieved through the use of 2 circuits. For high efficiency, the supply voltage should be set to 5V. The JK flip flop is with 1 output lines to operate. The number of input lines is 1. -400μAis the output current at high level. A 8mAvalue is set for low-level output current. The operating temperature should be lower than 70°C. Temperatures above 0°Cshould be used. In order for it to operate, a supply voltage of 4.5Vis required. There is a maximum voltage support of 5.5V. It is possible to obtain a frequency of 34MHz.

DM74ALS74AMX Features

Tape & Reel (TR) package
74ALS series
14 pins
2 Bits

DM74ALS74AMX Applications

There are a lot of ON Semiconductor DM74ALS74AMX Flip Flops applications.

• Frequency Divider circuits
• Data Synchronizers
• QML qualified product
• Storage Registers
• Synchronous counter
• Buffer registers
• Power down protection
• Test & Measurement
• ESD protection
• Single Down Count-Control Line