DM74ALS74AN

DM74ALS74AN Overview

It is embeded in 14-DIP (0.300, 7.62mm) case. The Tubepackage contains it. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. Through Holeis occupied by this electronic component. The JK flip flop operates at 4.5V~5.5Vvolts. In the operating environment, the temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74ALSseries of FPGAs. You should not exceed 34MHzin the output frequency of the device. In total, there are 2 elements. There is a consumption of 4mAof quiescent energy. The 74ALS74family includes it. There is an electronic part mounted in the way of Through Hole. As you can see from the design, it has pins with 14. The clock edge trigger type for this device is Positive Edge. The design is based on 2bits. The superior flexibility of this product is achieved by using 2 circuits. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. Its output current of 8mAallows for maximum design flexibility. It operates with 1 output lines. As of now, there are 1input lines. The high level output current is set to -400μA. A 8mAvalue is set for low-level output current. Operating temperatures should be lower than 70°C. Operating temperatures should be above 0°C. Normally, it operates with a voltage of 4.5VV as its minimum supply voltage. A maximum voltage of 5.5V can be provided by it. This can be achieved at a frequency of 34MHz. In its basic building block, there are 2 gates. There are 1 inputs involved.

DM74ALS74AN Features

Tube package
74ALS series
14 pins
2 Bits
2 gates

DM74ALS74AN Applications

There are a lot of ON Semiconductor DM74ALS74AN Flip Flops applications.

• Count Modes
• Divide a clock signal by 2 or 4
• Computers
• QML qualified product
• Memory
• Counters
• Safety Clamp
• Set-reset capability
• ATE
• Parallel data storage