DM74AS373WM

DM74AS373WM Overview

In the package 20-SOIC (0.295, 7.50mm Width), it can be found. Tube is the way it is packaged. It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. The supply voltage of the device is 4.5V~5.5V. It is 0°C~70°C at the operating temperature. An FPGA in this series belongs to the 74AS family. With this electronic part, there are 8 bits. This type belongs to the 74AS373 family. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the way in which this electronic part is mounted. Electronic circuits are represented by 8 input lines. The supply voltage should be maintained at 5V for high efficiency. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are no external factors that affect it, so it consumes 55mA quiescent current. 1 elements are present in it. The superior flexibility of the system is achieved through its use of 8 circuits. 15mA is set as the low level output current. -15mA is set as the high level output current. The operating temperature should be lower than 70°C. It is recommended that the operating temperature be higher than 0°C. The maximum supply voltage is 5.5V. With a voltage of 4.5V, it operates at its minimum capacity.

DM74AS373WM Features

20-SOIC (0.295, 7.50mm Width) package
74AS series
8 Bits
74AS373 family
20 pins
1 elements

DM74AS373WM Applications

There are a lot of ON Semiconductor DM74AS373WM Latches applications.

• Synchronous frequency dividers
• Meter applications
• Pattern Generators
• Shift right register
• Automotive ADAS
• Accumulator Registers
• BCD counting
• PCs and Notebooks
• Shift left register
• OC-48 communication systems