DM74AS74N

DM74AS74N Overview

14-DIP (0.300, 7.62mm)is the way it is packaged. There is an embedded version in the package Tube. T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. It is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. The 74ASseries comprises this type of FPGA. It should not exceed 105MHzin its output frequency. D latch consists of 2 elements. There is a consumption of 16mAof quiescent energy. The 74AS74family includes it. There is an electronic component mounted in the way of Through Hole. With its 14pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. The flip flop is designed with 2bits. The superior flexibility of this circuit is achieved by using 2 circuits. Optimal efficiency requires a supply voltage of 5V. There are 1 output lines on it. As of now, there are 1input lines. High level output current is set to -2mA. It is set to 20mAfor low level output current. It is recommended that the operating temperature be lower than 70°C. Ideally, the operating temperature should be greater than 0°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. It supports a maximum supply voltage of 5.5V volts. 105MHzis the maximum frequency that can be achieved.

DM74AS74N Features

Tube package
74AS series
14 pins
2 Bits

DM74AS74N Applications

There are a lot of ON Semiconductor DM74AS74N Flip Flops applications.

• Digital electronics systems
• Latch-up performance
• Event Detectors
• Circuit Design
• Control circuits
• Bounce elimination switch
• Pattern generators
• Data Synchronizers
• Guaranteed simultaneous switching noise level
• Clock pulse