Products
You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The
basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and
country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.Parameters | |
---|---|
Factory Lead Time | 6 Weeks |
Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
Number of Pins | 8 |
Operating Temperature | -40°C~150°C TJ |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 2 (1 Year) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Applications | DC Motors, General Purpose, Stepper Motors |
Technology | NMOS |
Voltage - Supply | 0V~5.5V |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Supply Voltage | 12V |
Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
Base Part Number | DRV8870 |
Function | Driver - Fully Integrated, Control and Power Stage |
Number of Outputs | 1 |
Max Output Current | 3.6A |
Supply Voltage-Max (Vsup) | 45V |
Supply Voltage-Min (Vsup) | 6.5V |
Interface | PWM |
Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
Output Configuration | Half Bridge (2) |
Voltage - Load | 6.5V~45V |
Fault Protection | Over Temperature |
Motor Type - AC, DC | Brushed DC |
Motor Type - Stepper | Unipolar |
Height | 1.7mm |
Length | 4.89mm |
Width | 3.9mm |
Thickness | 1.48mm |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The DRV8870DDAR is an 8-pin SO PowerPAD brushed DC motor driver with a current rating of 3.6A. The brushed-DC motor driver DRV8870DDAR is used in printers, appliances, industrial equipment, and other tiny machinery. Two logic inputs control the H bridge driver, which consists of four N-channel MOSFETs capable of bidirectional motor control with a peak current of 3.6A. PWM can be used to control motor speed in a variety of current-decay regimes. When both inputs are set to low, the computer enters a low-power sleep mode. It has built-in current regulation, which is based on the analog input VREF and the voltage on the ISEN pin, which is proportional to the motor current through an external sensor resistor. The ability to limit current to a given level can drastically minimize the amount of system power and bulk capacitance required to maintain constant voltage, especially during motor start-up and stall. Undervoltage, overcurrent, and temperature are all protected against failures and short circuits in the device.
PWM control interface
Low power sleep mode
Peak current drive of 3.6A
Integrated current regulation
Wide 6.5V to 45V operating voltage
Typical RDS(on) (HS + LS) of 565mohm
Drives one DC motor, one winding of a stepper motor, or other loads
Industrial
Portable Devices
Motor Drive & Control
Products