DS1090U-1+

DS1090U-1+ Overview

As a clock IC, PLLs is packaged using the Tube method. 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) contains this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result, frequency synthesizers can be found to contain 8 terminations. This Clock PLL will be fed by Clock as its input. Using 1 circuits, the electronic part's full performance can be accessed. With the Surface Mount, it is easy to install this electric component on the panel. This clock PLL works with a supply voltage of 3V~5.5V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. CMOS, TTL logic levels are supported by this RF synthesizer. It has been classified as a Clock Generator electronic part, which means that it is a semiconductor. It is a 8-bit clock PLL designed specifically for microprocessors. This part number is related to its related electronic parts. The frequency synthesizer has 8 pins that are available. There are a number of electronic parts in the EconOscillator? series, including this one. It is able to realize high efficiency when operating at a frequency of 8MHz. In order to obtain a load capacitance of 30pF, the PLL is capable of generating a large voltage.

DS1090U-1+ Features

Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Load capacitance of 30pF

DS1090U-1+ Applications

There are a lot of Maxim Integrated DS1090U-1+ Clock Generators applications.

• Signal generator
• Cellular/4G
• Notebooks
• Myriad digital applications
• Wireless base station for LTE, LTE-advanced
• Clock recovery
• Closed circuit systems
• Carrier synchronization in wired communication
• Local oscillators (LOs)
• Electronic countermeasures