DS1094LU-42M+

DS1094LU-42M+ Overview

The Tube method is used for packaging clock ICs. There is a clock generator embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are 8 terminations found in the file. This clock generator ic should receive a voltage of 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. To access the full performance of the electronic component, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. There are 3V~3.6V available for use with this clock PLL. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. It is possible to classify this electronic component as a Clock Generator. It is a 8-bit clock PLL designed specifically for microprocessors. This part number is related to its related electronic parts. There is a 8 pin that is available on the frequency synthesizers. This clock generator is a member of EconOscillator? series. 4 signal outputs enable clock PLL to magnify output frequency as high as possible. At frequencies of 2MHz, RF synthesizer achieves high efficiency.

DS1094LU-42M+ Features

Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V

DS1094LU-42M+ Applications

There are a lot of Maxim Integrated DS1094LU-42M+ Clock Generators applications.

• Modems
• Jitter reduction
• Coherent detection of the signal
• Quenching?
• MRI
• Media broadcast servers
• Radar
• Microwave backhaul IF
• Bit synchronization
• Melting