DS1210S

DS1210S Overview

It is packaged with the materials of Tube. A 16-SOIC (0.295, 7.50mm Width) has been provided to save space on the board. There are several types of Nonvolatile RAM and it is a high-quality and reliable type. A temperature of 0°C~70°C should be set for the operating environment. The voltage 4.75V~5.5V must be provided for the device to function normally. Using the Surface Mount mounting technique, it is mounted. It is common to use 16 terminations to prevent signals from reflecting off the end of the transmission line. There is a supply voltage of 5V for the device. The pins are configured as 16. Depending on the component with the lowest tolerance for high temperatures, 245 will determine the reflow temperature limit. Data transmission is ensured through 3 channels. An analog IC of this type is designated as POWER SUPPLY SUPPORT CIRCUIT. Voltage must be higher than 4.5V as the minimum value of supply voltage. Providing a voltage as high as 5.5V does not result in any degradation of characteristics or damage to the circuit internals.

DS1210S Features

Available in the 16-SOIC (0.295, 7.50mm Width) package
Nonvolatile RAM as controller type
Operating temperature of 0°C~70°C

DS1210S Applications

There are a lot of Rochester Electronics, LLC DS1210S Memory Controllers applications.

• Medical Instrumentation and Industrial Products
• System-in-Package (SiP) embedded flash drives (eSSD)
• eMMC embedded Flash
• Embedded modules including U.2, M.2, MO-297 and MO-300
• CFast cards
• Multi-Chip-Modules (MCM)
• Multi-Chip-Package (MCP)
• microSD cards for consumer and mobile applications
• High reliability & industrial Compact FlashTM Cards (CFC)
• Microprocessor Systems