DS1232N

DS1232N Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in a Tube-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 240 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. The power management belongs to the Power Management Circuits subcategory. A total of 8 pins are located on this power management. Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Push-Pull. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use DS1232, the base supervisor number, when searching for similar PMICs from the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly. As you can see, this IC power comes from the well-known MicroMonitor? series of products.

DS1232N Features

Simple Reset/Power-On Reset type

DS1232N Applications

There are a lot of Maxim Integrated DS1232N Voltage Supervisors applications.

• Electrical fire monitoring system
• Cloud computing
• Power distribution systems of infant care room
• FPGA design
• Insulation fault location system
• Fire equipment power monitoring system
• Network equipment
• Unattended substation automation
• Detection of phase sequence
• Linux and server computing