DS1232S+T&R

DS1232S+T&R Overview

Power management is packaged in a Tape & Reel (TR) way. Please refer to power management for 16-SOIC (0.295, 7.50mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. 16 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 4.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. We recommend setting the supervisors to 0°C~70°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. For this power management, there is an 2mA volt supply current. A similar IC managements number of the manufacturer can always be found by using DS1232, the base power ics number. The maximum supply temperature that PMIC chip can work with is 2mA. A PMIC from the well-known MicroMonitor? series of products is being offered here.

DS1232S+T&R Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
2mA operating supply current

DS1232S+T&R Applications

There are a lot of Maxim Integrated DS1232S+T&R Voltage Supervisors applications.

• Embedded computing
• Military communications
• External alarm
• DSP
• Cloud computing
• Functional modules
• Efficient information transmission
• Telecommunications equipment
• Battery cars
• Microcontroller system