DS1233D-5+T&R

DS1233D-5+T&R Overview

Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC power is to provide you with a reference of TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Through Hole mount. There are 3 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Through Hole is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supply current of the power management is 50μA. A similar IC managements number of the manufacturer can always be found by using DS1233D, the base power ics number. A maximum supply temperature of 50μA can be used. As you can see, this IC power comes from the well-known EconoReset series of products.

DS1233D-5+T&R Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current

DS1233D-5+T&R Applications

There are a lot of Maxim Integrated DS1233D-5+T&R Voltage Supervisors applications.

• Unattended substation automation
• Dash board
• Magnetic resonance imaging
• Satellite navigation
• Utility meter
• Solar power charger
• Refrigeration
• Smartphones
• Urban rail transit weak current power monitoring
• Military electronics