DS1321+

DS1321+ Overview

Tube has packaged it with its materials. As a result, it is provided in the 16-DIP (0.300, 7.62mm) to save space. This is a high quality and reliable type of Nonvolatile RAM. Setting the operating temperature to -40°C~85°C is recommended. To ensure the proper operation of the unit, a voltage of 4.75V~5.5V must be supplied. The mount is constructed using the Through Hole technique. More related electronic parts can be found according its base part number DS1321. A 16 termination is used to prevent signals from reflecting off the transmission line's end. Approximately 5V volts are supplied to the device. The 16 pins are configured on the board. Depending on the component with the lowest tolerance for high temperatures, 260 will determine the reflow temperature limit. An electronic apart with 16 channels is involved in this process. It falls under the category of Power Management Circuits. Data is transmitted through 1 channels. The power supplies of 5V enable high efficiency to be achieved. An analog IC of this type is designated as POWER SUPPLY SUPPORT CIRCUIT. Voltage must be higher than 4.5V as the minimum value of supply voltage. Providing a voltage as high as 5.5V does not result in any degradation of characteristics or damage to the circuit internals. An internal circuit can be supplied with a maximum current of 1.5mA without causing any degradation of its characteristics or damage to its integrity.

DS1321+ Features

Available in the 16-DIP (0.300, 7.62mm) package
Nonvolatile RAM as controller type
Operating temperature of -40°C~85°C

DS1321+ Applications

There are a lot of Maxim Integrated DS1321+ Memory Controllers applications.

• Industrial USB Flash Drive
• Multi-Chip-Modules (MCM)
• PCMCIA or ATA PC cards
• SmartCards
• High reliability & industrial Solid State Drives (SSD)
• Solid State Disks (SSD)
• MultiMediaCardsTM (MMC)
• High reliability & industrial Compact FlashTM Cards (CFC)
• System-in-Package (SiP) embedded flash drives (eSSD)
• NVSRAM Modules