DS1812R-5+T&R

DS1812R-5+T&R Overview

Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. There are 3 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. In order to maintain a stable supply current for the power management, 40μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using DS1812, the base power ics number. A maximum supply temperature of 40μA can be used. Supervisors from the well-known EconoReset series product line are featured in this PMIC.

DS1812R-5+T&R Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
40μA operating supply current

DS1812R-5+T&R Applications

There are a lot of Maxim Integrated DS1812R-5+T&R Voltage Supervisors applications.

• Insulation fault location system
• Display equipment
• Leakage current detection
• Stable power system
• Battery-powered equipment
• Linux and server computing
• Sensitive sensors
• Electronics installed in the vehicle
• Digitally controlled LDO regulators circuit
• Important electronics for automotive protection