DS1816-10

DS1816-10 Overview

It is mounted through 3 terminals on the power management. Packaging is in the form of a Bulk. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Through Hole mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. 3 pins are on the supervisor. IC management can only work with a supply voltage of 0V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 35μA. To find similar IC managements from the manufacturer, you can always search by DS1816. Voltage supervisor can work with a supply temperature of 35μA at the most. The IC power that you are looking at comes from our well-known EconoReset series product line.

DS1816-10 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
35μA operating supply current

DS1816-10 Applications

There are a lot of Maxim Integrated DS1816-10 Voltage Supervisors applications.

• Personal computers
• Display equipment
• Insulation fault location system
• FPGA design
• Smartphones
• Consumer electronics
• External alarm
• Radio
• Smart meter
• Detection of phase sequence