DS2114Z

DS2114Z Overview

A transmission line may also have 9 terminations, which are made using devices matched to its characteristic impedance. Because of its low package cost, the 16-SOIC (0.154, 3.90mm Width) is widely used in the electronic industry. Tube's packaging follows his material specifications. Surface Mount allows mounting of PCBs. A temperature greater than 0°C~70°C should not be used as the operating temperature. This material is SCSI, SE-qualified for use in standard applications. Normal operation is ensured with a 4V~5.5V Supply Voltage. For finding related parts, you can use Base Part Number DS2114. For specific uses, 16 pins are included. In general, a signal line is defined as a line devoted solely to transmitting signals or intelligence, whether it's for purposes of public or private communication. Optimal efficiency requires a supply voltage of 5V. On the back is a Surface Mount-mount. There is a place for it in Subcategory Bus Terminators. Operating 5V Power Supplies is required. This device has a resistance of 116Ohm (Ω). A current supply must be provided to 5.5V so that it can function properly.

DS2114Z Features

9 terminations
Tube package
DS2114 family
16 pin count
9 signal lines
5V power supplies

DS2114Z Applications

There are a lot of Maxim Integrated DS2114Z Signal Terminators applications.

• Compact disk drives
• Notebooks
• Telecommunication Equipment
• tape drives
• USB hubs
• Data Networking
• Remote input module
• Data Routers
• SCSI cable
• Optical disk drives