DS2118MB+

DS2118MB+ Overview

A transmission line may also have 9 terminations, which are made using devices matched to its characteristic impedance. A well-known feature of the 36-BSOP (0.295, 7.50mm Width) is its low packaging cost. Packaging follows Tube's material specifications. The PCB is mounted using Surface Mount. It should not exceed 0°C~70°C°C when operating. For standard applications, it is SCSI, LVD, SE-qualified. Ensure normal operation with the 4V~5.5V Supply Voltage. A Base Part Number DS2118M can help you find related parts. Specific uses are provided with 36 pins. A 9 signal line is an exclusive line to transmit signals or intelligence. 9 lines can be public or private. It is important to maintain the supply voltage at 5V in order to achieve high efficiency. On the back is a Surface Mount-mount. This item belongs to Subcategory Bus Terminators. Communication devices such as computers use 36 pins, which are pronged contacts. The 5V Power Supplies are necessary for the operation of the system. This electrical device has a resistance of 110Ohm. 5V needs a continuous supply current in order to function properly. In addition to SINGLE ENDED TERMINATION REQUIRES 4V TO 5.5V SUPPLY, there is also A.

DS2118MB+ Features

9 terminations
Tube package
DS2118M family
36 pin count
9 signal lines
36 pins
5V power supplies

DS2118MB+ Applications

There are a lot of Maxim Integrated DS2118MB+ Signal Terminators applications.

• SCSI cable
• Disk array (RAID)
• laser printers
• plotters
• High speed protected termination for digital input with serialized SPI output
• Programmable logic controller and remote input modules
• Compact disk drives
• IEC61131-2 type 1, 2 and 3
• tape drives
• Data Routers