DS90LV001TLD

DS90LV001TLD Overview

For convenience, power buffer comes packaged in 8-WFDFN Exposed Pad.Currently, this power buffer is available for shipping in Tape & Reel (TR) packages.The Surface Mount universal mout is designed for easy adaptability.Typical Buffer, ReDriver type.There is no voltage involved in the operation of this op amp buffer.As a result, there is a CML, LVDS, LVPECL input that is enabled.To avoid malfunctioning, the operating temperature should be set to -40°C~85°C.The operational amplifier buffer is aimed at LVDS and other applications as well.You can also try searching with "DS90LV001" when you need specific pin-to-pin solutions for your special needs.The op amp buffer has 8 terminals that can be found along its length.During reflow, it reaches a peak temperature of 235.3.3V voltage enables the splitter to handle a wide range of demanding tasks.A Power buffer's pinout begins with its 8 pins.The op amp buffers have 8 pins.For mounting on PCBs or other boards, it has a Surface Mount.In the industry, other Line Driver or Receiverss play an important role, such as the power buffer.In order for this power buffer to operate, a voltage of 70mA must be applied.In order to operate normally, you need a voltage of 3.3V.Receiver uses 1-Bit technology.Power dissipation is 726mW at most for this splitter.Splitters should be powered by 70mA-volts under normal conditions.This is a 1 element interface repeater signal.

DS90LV001TLD Features

Mainly used in LVDS.
A standard Line Driver or Receivers.
1-Bit receiver.

DS90LV001TLD Applications

There are a lot of Texas Instruments DS90LV001TLD Signal Buffers, Repeaters, Splitters applications.

• Communications Switchers
• Backplane Interconnect
• Loopback
• Laptop Computers (for External Video Cards)
• DSLAMs
• Test Equipment
• SATA SSDs or HDDs
• Network Switches/Routers
• Medical
• Industrial Server