DS90LV001TM

DS90LV001TM Overview

For ease of transportation, the power buffer is packaged in 8-SOIC (0.154, 3.90mm Width).Currently, this power buffer is available for shipping in Tube packages.It comes with a universal mout that allows for easy adaptation.Here's a typical Buffer, ReDriver.There is 3V~3.6V voltage used to power this op amp buffer. It works on 3V~3.6V voltage.Input of CML, LVDS, LVPECL is enabled by it.To make sure that the cooling system does not malfunction, you should set the operating temperature to -40°C~85°C.In addition to applications for LVDS, this operational amplifier buffer is also intended for other applications.It is possible to search with "DS90LV001" to get more pin-to-pin solutions for your special requirements if you are looking for some.Temperature 235 is its peak reflow temperature.The splitter works with a voltage of 3.3V, so it can be used for various demanding tasks.From the 8 pins on the Power buffer, we can see the pinout of the Power buffer.It is equipped with 8 pins.In addition to the Surface Mount axis, it has a female hole for mounting to PCBs or other boards.There are other Line Driver or Receivers's in the industry that play a significant role, like the power buffer.Using 70mA as a voltage, this power buffer operates.The voltage required for normal operation is 3.3V.The receiver is 1-Bit-based.This splitter dissipates 726mW of power at most.Normal use of the splitter requires 47mA as the nominal supply current.An interface repeater signal with 1 elements.

DS90LV001TM Features

Mainly used in LVDS.
A standard Line Driver or Receivers.
1-Bit receiver.

DS90LV001TM Applications

There are a lot of Texas Instruments DS90LV001TM Signal Buffers, Repeaters, Splitters applications.

• DSLAMs
• Test Equipment
• Desktop Computers
• Storage Area Networks
• Network Switches/Routers
• Servers
• Clock Distribution
• Data or Clock Signal Amplification
• Laptop Computers (for External Video Cards)
• Loopback