DS90LV001TMX

DS90LV001TMX Overview

This power buffer comes packaged in 8-SOIC (0.154, 3.90mm Width) so that it can be transported easily.Ready for shipping in Tape & Reel (TR) package.A universal mout that is easy to adapt.Typical Buffer, ReDriver type.There is no voltage involved in the operation of this op amp buffer.There is CML, LVDS, LVPECL input facilitation.Setting the operating temperature to -40°C~85°C will prevent malfunctions.In addition to LVDS, this operational amplifier buffer targets other applications.To get more pin-to-pin solutions for your special needs, try searching a higher letter such as "DS90LV001" instead of "s".An op amp buffer of the op amp buffer is equipped with 8 terminals.During reflow, the peak temperature of the material is determined by the number 235.As long as the splitter is supplied with 3.3V voltage, it can perform a wide range of demanding tasks.Pinouts start at 8 pins on the power buffer.There are 8 pins on the op amp buffers.In addition to the Surface Mount axis, it has a female hole for mounting to PCBs or other boards.The power buffer and other Line Driver or Receivers play an important role in the industry.Using 70mA as a voltage, this power buffer operates.The voltage required for normal operation is 3.3V.The repeter uses a 1-Bit receiver.It dissipates 726mW of power at most.A 1 element interface repeater signal is shown here.

DS90LV001TMX Features

Mainly used in LVDS.
A standard Line Driver or Receivers.
1-Bit receiver.

DS90LV001TMX Applications

There are a lot of Texas Instruments DS90LV001TMX Signal Buffers, Repeaters, Splitters applications.

• Add/Drop Muxes
• Multidrop Buses
• Industrial Server
• Cellular Phone Base Stations
• Backplane Interconnect
• Portable IPC/HMI
• Medical
• PECL-to-LVDS Translation
• Test Equipment
• Storage Area Networks