EPM1270F256A5N

EPM1270F256A5N Overview

There are 980 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 212 I/O ports.256terminations have been programmed into the device.The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.The power supply voltage is 2.5V.This part is included in Programmable Logic Devices.Chips are programmed with 256 pins.It is also characterized by IT CAN ALSO OPERATE AT 3.3V.In order to achieve high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].The electronic part is mounted by Surface Mount.There are 256pins on it.There is a maximum supply voltage of 3.6V.Initially, it requires a voltage of 2.375Vas the minimum supply voltage.Programmable I/Os are counted up 212.A frequency of 1.8797GHzcan be achieved.Ideally, the operating temperature should be greater than -40°C.It is recommended that the operating temperature be below 125°C.In its simplest form, it consists of 127 logic blocks (LABs).In order to form a fundamental building block, there are 1270 logic elements or cells.It is recommended that the maximal frequency be less than 0.The devices contain a memory of 1kBthat can be used to store programs and data.

EPM1270F256A5N Features

FBGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)

EPM1270F256A5N Applications

There are a lot of Altera EPM1270F256A5N CPLDs applications.

• Wide Vin Industrial low power SMPS
• Digital systems
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• PULSE WIDTH MODULATION (PWM)
• DMA control
• I/O expansion
• Software Configuration of Add-In Boards
• Bootloaders for FPGAs
• Software-driven hardware configuration
• Network Interface Card (NIC) and Host Bus Adapter (HBA)