EPM1270GM256C5N

EPM1270GM256C5N Overview

The mobile phone network has 980 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The item is packaged with TFBGA.In this case, there are 212 I/Os programmed.Devices are programmed with terminations of [0].The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.A voltage of 1.8Vprovides power to the device.There is a part included in Programmable Logic Devices.A chip with 256pins is programmed.It is also characterized by IT CAN ALSO OPERATE AT 3.3V.If high efficiency is desired, the supply voltage should be kept at [0].In order to store data, FLASHis used.In this case, Surface Mountis used to mount the electronic component.The 256pins are designed into the board.It operates at a maximum supply voltage of 1.89V volts.A minimum supply voltage of 1.71V is required for this device to operate.A programmable I/O count of 212 has been recorded.There is 304MHz frequency that can be achieved.There should be a temperature above 0°Cat the time of operation.A temperature lower than 85°Cis recommended for operation.The system consists of 127 logic blocks (LABs).As a fundamental building block, there are 1270 logic elements/cells.It is recommended that the maximum frequency is less than 0.The devices contain a memory of 1kBfor storing programs and data.

EPM1270GM256C5N Features

TFBGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)

EPM1270GM256C5N Applications

There are a lot of Altera EPM1270GM256C5N CPLDs applications.

• Storage Cards and Storage Racks
• POWER-SAVING MODES
• Auxiliary Power Supply Isolated and Non-isolated
• Battery operated portable devices
• Synchronous or asynchronous mode
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• State machine control
• PLC analog input modules
• Software Configuration of Add-In Boards
• Random logic replacement