EPM1270T144C3

EPM1270T144C3 Overview

This network has 980macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the TQFP package.There are 116 I/Os programmed in it.Devices are programmed with terminations of [0].QUADis the terminal position of this electrical part.A voltage of 2.5V is used as the power supply for this device.This part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Bulk.There are 144 pins on the chip.In order to maintain high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].This device is mounted by Surface Mount.The device is designed with pins [0].With a maximum supply voltage of [0], it operates.In order for it to operate, a supply voltage of 2.375Vis required.A total of 116Programmable I/Os are present.This can be achieved at a frequency of 3.01205GHz.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 85°C.It is composed of 127 logic blocks (LABs).Fundamental building blocks consist of 1270logic elements/cells.The maximal frequency should be lower than 304MHz.Devices include a memory of 1kBavailable for the storage of programs and data.

EPM1270T144C3 Features

TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)

EPM1270T144C3 Applications

There are a lot of Altera EPM1270T144C3 CPLDs applications.

• LED Lighting systems
• I2C BUS INTERFACE
• Custom state machines
• INTERRUPT SYSTEM
• Wireless Infrastructure Base Band Unit and Remote Radio Unit
• POWER-SAVING MODES
• Power up sequencing
• Boolean function generators
• Programmable polarity
• Programmable power management