EPM1270T144C3N

EPM1270T144C3N Overview

A mobile phone network consists of 980macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).TQFPis the package in which it resides.The device has 116inputs and outputs.The device is programmed with 144 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 2.5Vprovides power to the device.It is a part of family [0].The chip should be packaged by Bulk.It is programmed with 144 pins.In order to achieve high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].This device is mounted by Surface Mount.This board has 144 pins.There is a maximum supply voltage of 3.6Vwhen the device is operating.A minimum supply voltage of 2.375V is required for this device to operate.There can be 304MHz frequency achieved.Ideally, the operating temperature should be greater than 0°C.The operating temperature should be lower than 85°C.The program consists of 127 logic blocks (LABs).As a fundamental building block, there are 1270 logic elements/cells.It is recommended that the maximal frequency be less than 0.These devices are capable of storing programs and data in 1kBmemory.

EPM1270T144C3N Features

TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)

EPM1270T144C3N Applications

There are a lot of Altera EPM1270T144C3N CPLDs applications.

• I/O PORTS (MCU MODULE)
• DDC INTERFACE
• ON-CHIP OSCILLATOR CIRCUIT
• POWER-SAVING MODES
• PULSE WIDTH MODULATION (PWM)
• Digital multiplexers
• Configurable Addressing of I/O Boards
• Digital designs
• USB Bus
• Code converters