EPM2210F256C3N

EPM2210F256C3N Overview

The mobile phone network has 1700 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).FBGAis the package in which it resides.In this case, there are 204 I/Os programmed.256terminations are programmed into the device.The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.A voltage of 2.5V is used as the power supply for this device.This part is in the family [0].It is recommended to package the chip by Bulk.It is programmed with 256 pins.This device is also capable of displaying [0].High efficiency requires the supply voltage to be maintained at [0].For data storage, FLASHis adopted.In this case, Surface Mountis used to mount the electronic component.It is designed with 256 pins.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.It is powered by 2.375Vas its minimum supply voltage.There is 304MHz frequency that can be achieved.Ideally, the operating temperature should be greater than 0°C.A temperature lower than 85°Cis recommended for operation.In its simplest form, it consists of 221 logic blocks (LABs).An elementary building block consists of 2210logic elements/cells.If the maximal frequency is less than [0], it should be lower than that.The devices contain a memory of 1kBthat can be used to store programs and data.

EPM2210F256C3N Features

FBGA package
204 I/Os
256 pin count
256 pins
221 logic blocks (LABs)

EPM2210F256C3N Applications

There are a lot of Altera EPM2210F256C3N CPLDs applications.

• I2C BUS INTERFACE
• PULSE WIDTH MODULATION (PWM)
• ON-CHIP OSCILLATOR CIRCUIT
• STANDARD SERIAL INTERFACE UART
• ROM patching
• Multiple Clock Source Selection
• Cross-Matrix Switch
• Reset swapping
• High speed graphics processing
• Interface bridging