EPM240GF100C5N

EPM240GF100C5N Overview

There are 192 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.FBGAis the package in which it resides.There are 80 I/Os on the board.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of BOTTOM.Power is provided by a supply voltage of 1.8V volts.This part is part of the family [0].There are 100 pins on the chip.The device can also be used to find [0].It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.For storing data, it is recommended to use [0].The electronic part is mounted by Surface Mount.The pins are [0].In this case, the maximum supply voltage is 1.89V.Initially, it requires a voltage of 1.71Vas the minimum supply voltage.A programmable I/O count of 80 has been recorded.This frequency can be achieved at 1.8797GHz.In order to operate, the temperature should be higher than 0°C.Ideally, the operating temperature should be below 85°C.The system consists of 24 logic blocks (LABs).In order to form a fundamental building block, there are 240 logic elements or cells.It is recommended that the maximum frequency is less than 0.Devices are equipped with a memory capacity of 1kBfor storing programs and data.

EPM240GF100C5N Features

FBGA package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)

EPM240GF100C5N Applications

There are a lot of Altera EPM240GF100C5N CPLDs applications.

• Software-driven hardware configuration
• DMA control
• Voltage level translation
• Wireless Infrastructure Base Band Unit and Remote Radio Unit
• High speed graphics processing
• Configurable Addressing of I/O Boards
• Parity generators
• Dedicated input registers
• Address decoders
• Synchronous or asynchronous mode