EPM240GT100C5N

EPM240GT100C5N Overview

There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is packaged with TQFP.As a result, it has 80 I/O ports programmed.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered from a supply voltage of 1.8V.There is a part included in Programmable Logic Devices.As a result, it is packaged as Bulk.The chip is programmed with 100 pins.If this device is used, you will also be able to find [0].The supply voltage should be maintained at 1.8V for high efficiency.It is recommended to store data in [0].The electronic component is mounted by Surface Mount.It is designed with 100 pins.A voltage of 1.89V is the maximum supply voltage for this device.A minimum supply voltage of 1.71V is required for this device to operate.There are 80 Programmable I/Os.There can be 1.8797GHz frequency achieved.Operating temperatures should be higher than 0°C.The operating temperature should be lower than 85°C.It consists of 24 logic blocks (LABs).An elementary building block consists of 240logic elements/cells.It should be below 304MHzat the maximal frequency.Using the devices' 1kBmemory, programs and data can be stored.

EPM240GT100C5N Features

TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)

EPM240GT100C5N Applications

There are a lot of Altera EPM240GT100C5N CPLDs applications.

• Software Configuration of Add-In Boards
• Boolean function generators
• SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
• Complex programmable logic devices
• Programmable polarity
• Voltage level translation
• ON-CHIP OSCILLATOR CIRCUIT
• TIMERS/COUNTERS
• Software-Driven Hardware Configuration
• Preset swapping