EPM3032ALC44-10N

EPM3032ALC44-10N Overview

In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.The item is enclosed in a PLCC package.It is programmed with 34 I/Os.It is programmed to terminate devices at [0].The terminal position of this electrical component is QUAD.It is powered by a voltage of 3.3V volts.It belongs to the family [0].There are 44pins on the chip.When using this device, YEScan also be found.It is possible to construct digital circuits using 600gates, which are devices that serve as building blocks.For high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.This device is mounted by Surface Mount.The 44pins are designed into the board.There is a maximum supply voltage of 3.6V.Initially, it requires a voltage of 3Vas the minimum supply voltage.This can be achieved at a frequency of 227.3MHz.There should be a temperature above 0°Cat the time of operation.The operating temperature should be lower than 70°C.In total, it contains 2 logic blocks (LABs).It is recommended that the maximum frequency be less than 227.3MHz.This kind of FPGA is composed of EE PLD.

EPM3032ALC44-10N Features

PLCC package
34 I/Os
44 pin count
44 pins
2 logic blocks (LABs)

EPM3032ALC44-10N Applications

There are a lot of Altera EPM3032ALC44-10N CPLDs applications.

• STANDARD SERIAL INTERFACE UART
• POWER-SAVING MODES
• Wide Vin Industrial low power SMPS
• Address decoding
• Boolean function generators
• Field programmable gate
• Timing control
• Multiple Clock Source Selection
• Bootloaders for FPGAs
• PLC analog input modules