EPM3032ATC44-4N

EPM3032ATC44-4N Overview

There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a TQFP package.There are 34 I/Os on the board.There is a 44terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 3.3V.It is a part of family [0].It has 44pins programmed.This device can also display [0].A digital circuit can be constructed using 600gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is adopted to store data in [0].This electronic part is mounted in the way of Surface Mount.44pins are included in its design.It operates at a maximum supply voltage of 3.6V volts.With a minimal supply voltage of [0], it operates.The frequency that can be achieved is 227.3MHz.In order to operate properly, the operating temperature should be higher than 0°C.A temperature less than 70°Cshould be used for operation.There are 2 logic blocks (LABs) in its basic building block.There should be a lower maximum frequency than 227.3MHz.A programmable logic type is categorized as EE PLD.

EPM3032ATC44-4N Features

TQFP package
34 I/Os
44 pin count
44 pins
2 logic blocks (LABs)

EPM3032ATC44-4N Applications

There are a lot of Altera EPM3032ATC44-4N CPLDs applications.

• STANDARD SERIAL INTERFACE UART
• Complex programmable logic devices
• PLC analog input modules
• Preset swapping
• Programmable power management
• Protection relays
• Software-Driven Hardware Configuration
• I/O expansion
• Custom shift registers
• Address decoding