EPM570F256C3N

EPM570F256C3N Overview

There are 440 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 160 I/Os.There are 256 terminations programmed into the device.The terminal position of this electrical component is BOTTOM.Power is supplied by a voltage of 2.5V volts.The part belongs to Programmable Logic Devices family.Bulkshould be used to package the chip.It is equipped with 256 pin count.In order to achieve high efficiency, the supply voltage should be maintained at [0].FLASH is adopted for storing data.Surface Mountmounts this electronic component.A total of 256pins are provided on this board.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Normally, it operates with a voltage of 2.375VV as its minimum supply voltage.In total, there are 160programmable I/Os.It is possible to achieve a frequency of 3.01205GHz.In order to operate, the temperature should be higher than 0°C.A temperature lower than 85°Cis recommended for operation.There are 57logic blocks (LABs) that make up its basic building block.There are 570 logic elements/cells to form a fundamental building block. If the maximal frequency is less than [0], it should be lower than that.The devices contain a memory of 1kBthat can be used to store programs and data.

EPM570F256C3N Features

FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)

EPM570F256C3N Applications

There are a lot of Altera EPM570F256C3N CPLDs applications.

• Power Meter SMPS
• Reset swapping
• Field programmable gate
• Multiple DIP Switch Replacement
• Digital multiplexers
• Synchronous or asynchronous mode
• PLC analog input modules
• Preset swapping
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Handheld digital devices