EPM570GF256C3

EPM570GF256C3 Overview

In the mobile phone network, there are 440macro cells, which are cells with high-power antennas and towers.The product is contained in a FBGA package.The device is programmed with 160 I/Os.It is programmed that device terminations will be 256 .Its terminal position is BOTTOM.Power is supplied by a voltage of 1.8V volts.It is a part of the family [0].It is packaged in the way of Bulk.Chips are programmed with 256 pins.If you use this device, you will also find [0].In order to maintain high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].The electronic component is mounted by Surface Mount.The 256pins are designed into the board.A maximum voltage of 1.89Vis required for operation.The device is designed to operate with a minimal supply voltage of 1.71VV.There are 160 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. A frequency of 3.01205GHzcan be achieved.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 85°C.The system consists of 57 logic blocks (LABs).There are 570 logic elements/cells to form a fundamental building block. It is recommended that the maximal frequency be less than 0.Using the devices' 1kBmemory, programs and data can be stored.

EPM570GF256C3 Features

FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)

EPM570GF256C3 Applications

There are a lot of Altera EPM570GF256C3 CPLDs applications.

• Programmable polarity
• ON-CHIP OSCILLATOR CIRCUIT
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• PULSE WIDTH MODULATION (PWM)
• Synchronous or asynchronous mode
• Timing control
• PLC analog input modules
• Handheld digital devices
• Page register
• Custom shift registers