EPM570GT100C4N

EPM570GT100C4N Overview

There are 440 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the 100-TQFP package.It is programmed with 76 I/Os.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical component is QUAD.The power supply voltage is 1.8V.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Tray.During operation, the operating temperature is kept at 0°C~85°C TJ to ensure its reliability.Chips should be mounted by Surface Mount.It belongs to the MAX? IIseries of FPGAs.If this device is used, you will also be able to find [0].The EPM570can be used to identify its related parts.There are 570 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.A total of 1.5/3.31.8V power supplies are needed to run it.There is a maximum supply voltage (Vsup) of 1.89V.There should be a higher supply voltage (Vsup) than 1.71V.

EPM570GT100C4N Features

100-TQFP package
76 I/Os
The operating temperature of 0°C~85°C TJ
1.5/3.31.8V power supplies

EPM570GT100C4N Applications

There are a lot of Intel EPM570GT100C4N CPLDs applications.

• Dedicated input registers
• Timing control
• Boolean function generators
• Protection relays
• Wide Vin Industrial low power SMPS
• Multiple Clock Source Selection
• Power up sequencing
• Power Meter SMPS
• POWER-SAVING MODES
• Software Configuration of Add-In Boards